Transmission Modes
15
1
❖ When sending by IP-Fax
When using a gatekeeper server, press [] to display in the destina-
tion display column.
When using a SIP server, press [] to display in the destination dis-
play column.
Note
❒ If either “Enable H.323” (when using a gatekeeper) or “Enable SIP” (when us-
ing a SIP server) is selected in the Fax Features menu, is displayed in
place of . Press [] to display in the destination display column.
Reference
p.24 “IP-Fax Functions”
p.28 “Internet Fax Functions”
“Fax Features”, General Settings Guide
Memory Transmission
Memory transmission mode has standard fax, Internet Fax and IP-Fax.
Important
❒ If there is a power failure (the main power switch is turned off) or the machine
is unplugged for about twelve hours, all the documents stored in memory are
deleted. As soon as the main power switch is turned on, the Power Failure Re-
port is printed to help you identify deleted files. Simply turning off the power
by pressing the Operation switch does not delete stored documents. See
“Troubleshooting When Using the Facsimile Function”, Troubleshooting.
❒ If memory is full (0% appears on the top right corner of the display), Memory
Transmission is disabled. Use Immediate Transmission instead.
To Next Page
Loading...
