Ricoh MP 161 - Setting SEP Codes for Reception

Setting SEP Codes for Reception
103
2
Setting SEP Codes for Reception
Follow these steps to enter a SEP Code to request the destination to transmit a
document.
You can receive a document stored in the destination's memory if the document
has the same SEP Code as the SEP Code you entered.
This function enables the machine to utilize services that use the polling function
or receive documents from multiple destinations.
Important
❒ Documents can be received from facsimiles that have Information Boxes and
the polling transmission function.
❒ A SEP Code cannot be used with Internet Fax.
❒ To use this function, set [SEP Code RX] to [On].
❒ Program this function to one of the User Function keys in advance.
A Press [TX Mode].
B Select [SEP Code RX] using {U} or {T}, and then press the {OK} key.
C Select [On] using {U} or {T}, and then press the {OK} key.
The screen returns to that of step
B
.
D Press the {Escape} key.
E Enter the fax number of a destination or an IP-Fax destination.