Transmission
14
1
You can change transmission mode by pressing the {Transmission Mode} key.
Check the indicator on the operation panel to see which mode is currently active.
If it is not lit, Immediate Transmission mode is set.
Reference
p.19 “Parallel Memory Transmission”
p.20 “Simultaneous Broadcast”
Selecting Type of Transmission
You can select the transmission type: standard fax, IP-Fax, or Internet Fax.
Switch between types of transmission by pressing the selection key displayed on
the standby screen.
Important
❒ To select IP-Fax destinations or Internet Fax destinations, the optional print-
er/scanner unit must be installed. The display differs depending on whether
or not the optional printer/scanner unit is installed.
❖ When sending over a fax line
Press [] to display in the destination display column.
❖ When sending to an e-mail address
Press [] to display in the destination display column.
ASO023S
To Next Page
Loading...
