Transmission
66
1
E Select a destination using {U} or {T}, and then press {V} to specify it (put
a tick against it).
Multiple destinations can be selected.
Press {W} to deselect a destination.
F Press the {OK} key.
Note
❒ You cannot specify destinations twice. If you try, the “This destination
has already been programmed.” message appears. Press [Exit] to return
to the standby screen.
❒ Press [Add Dest] to specify other destinations.
Search by Registration Number
Follow these steps to search for a destination by specifying a registration
number stored in the destination list.
Important
❒ If [LDAP Search] is set to [Off] in Administrator Tools, in the System Settings
menu, the display for selecting either [Search Address Book] or [Search LDAP]
does not appear.
A Press [] to switch the destination to fax number, e-mail address, or
IP-Fax destination.
B Press the {Search Destination} key.
ASO033S
To Next Page
Loading...
