Ricoh MP 161 - Sending by IP-Fax

Specifying a Destination
45
1
Sending by IP-Fax
This section explains how to specify a destination using IP-Fax transmission.
When using IP-Fax transmission, specify the IP-Fax destination (IPv4 address,
host name, or alias telephone number) in place of the fax number.
Important
❒ To use IP-Fax functions, the optional printer/scanner unit must be installed.
A Press [] to switch the destination to IP-Fax destination.
When using a gatekeeper server, select .
When using a SIP server, select .
B Press [Manual].
To specify a destination using a Quick Dial key, see “Using the Quick Dial
Keys”.
C Enter the IP-Fax destination, and then press the {OK} key.
If you enter an incorrect character, press the {Clear/Stop} key. Then, re-enter
the characters correctly.
To change the IP-Fax destination after pressing the {OK} key, press [EditDest],
re-enter an IP-Fax destination, and then press the {OK} key.