Sending Fax Documents from Computers
167
5
Managing Facsimile Functions Using SmartDeviceMonitor for
Admin
You can check information about this machine's fax functions using a computer
and save files on a computer using SmartDeviceMonitor for Admin.
Note
❒ For details about SmartDeviceMonitor for Admin and its installation, see
“Monitoring and Configuring the Printer”, Network Guide.
❒ For details, see Network Guide and SmartDeviceMonitor for Admin Help.
Reference
“Monitoring and Configuring the Printer”, Network Guide
LAN-Fax Operation Messages
This section explains typical operation error messages displayed on the comput-
er when using the LAN-Fax Driver, and solutions to those messages.
Message Causes and Solutions
Cannot connect to the de-
vice.
Check the network connection.
Check that the power is turned on.
The number of entries in
Destinations exceed the
limits. Up to 300 entries
can be entered.
The number of destinations specified exceeds the maxi-
mum possible. The maximum number of destinations
that can be specified at one time is 300.
"LAN-Fax" has already
been launched. Cannot
launch it again.
The [LAN-Fax] dialog box is already open. Quit LAN-Fax
once, and then start it up again.
Failed to allocate memo-
ry.
Available memory on the computer is insufficient. Quit
applications currently not in use.
To Next Page
Loading...
Need help?
General
