Sending Fax Documents from Computers
157
5
D Specify settings according to the type of fax transmission.
Specify settings according to the type of fax transmission selected in step
B
,
as follows:
•If you selected [Fax], select a line or a protocol in the [Line:] list.
•If you selected [E-mail], select the [Do not use SMTP server] check box if you
want to bypass the SMTP server.
E Click [Set as Destination].
The entered destination is added and appears in the [List of Destination:] box.
If you add a destination by mistake, click the wrong destination, and then
click [Delete from List].
F To specify more destinations, repeat steps
B
through
E
.
Note
❒ For the maximum number of digits for a destination, see “Maximum Values”.
Reference
p.42 “Sending Over a Fax Line”
p.45 “Sending by IP-Fax”
p.48 “Sending to an E-mail Address”
p.176 “Maximum Values”
Specifying Options
You can specify the options in the following list.
For details about transmission options, see the LAN-Fax Driver's Help.
• Sending at specific time
•Print Fax Header
• Attach a Cover Sheet
•Preview
• Save as file
To send a fax document at a specific time
A Click [Send Options].
The [Send Options] tab appears.
B Select the [Sending at specific time] check box, and then specify a transmission
time.
To Next Page
Loading...
