Specifying a Destination
57
1
Redial
The machine stores the latest destinations specified for each transmission meth-
od. This function saves time when you are sending to the same destination re-
peatedly, as you do not have to enter the destination again.
Important
❒ The following kinds of destinations are not stored:
• Destinations specified using the destination list
• Destinations specified as a group destination
• Destinations dialed using the external telephone
• Destinations dialed by Redial (regarded as already stored in memory)
• Second and later destinations broadcasted to
• Destinations specified in the LAN-Fax Driver on the computer
❒ To redial a fax number, do not dial any numbers before you press the
{Pause/Redial} key. If you press the {Pause/Redial} key after entering numbers
using the number keys, a pause is entered instead.
A Place the original, and then select the scan settings you require.
B Press the {Pause/Redial} key.
C Select the destination you want to redial to using {U} or {T}, and then
press the {OK} key.
D Press the {Start} key.
ASO027S
To Next Page