Ricoh MP 161 - Canceling a Transmission; Before the Original Is Scanned; While the Original Is Being Scanned

Canceling a Transmission
81
1
Canceling a Transmission
This section explains how to cancel a fax transmission.
Important
❒ Remember that the Communicating indicator turns off almost immediately
when an Internet Fax is being sent.
Before the Original Is Scanned
Use this procedure to cancel a transmission before pressing the {Start} key.
A Press the {Clear Modes} key.
Note
❒ When originals are placed into the ARDF, you can cancel transmission
simply by removing them.
While the Original Is Being Scanned
Use this procedure to cancel a transmission after pressing the {Start} key.
A Press the {Clear/Stop} key.
The machine stops scanning.
Note
❒ Scanning may be completed while you are performing the cancel operation.
ASO034S
ASO035S