Reception Functions
121
3
❖ Fax Number
fax=destination fax number@host name of this machine. domain name
Example: to transfer to fax number 212-123-4567, specify:
fax=2121234567@abc.company.com
❖ Single destination programmed in the Quick Dial Keys
fax=qregistration number of 3 digits or less@host name of this machine.do-
main name
Example: to transfer to the destination number 001:
fax=q001@abc.company.com
❖ Group destination programmed in the destination list
fax=qppregistration number of 3 digits or less@host name of this ma-
chine.domain name
Example: to transfer to the destination programmed under Group number
004:
fax=qpp004@abc.company.com
Note
❒ E-mail received via SMTP can also be routed to single or group destinations
programmed in the destination list.
❒ If an e-mail transfer request is received when the “SMTP RX File Delivery” is
“Off” in the Fax Features menu, this machine responds with an error message
to the SMTP server.
❒ You can make settings that limit transfer to specified originators.
❒ Using this function, you can also send documents from your e-mail applica-
tion to e-mail addresses and G3 fax machines' destinations through this ma-
chine simultaneously.
❒ For the maximum number of destinations you can program in a group, see
“Maximum Values”.
Reference
p.176 “Maximum Values”
“Fax Features”, General Settings Guide
JBIG Reception
If you use JBIG (Joint Bi-level Image Experts Group) compression, you can send
photographic originals faster than with other methods of compression. It allows
you to receive documents sent in the JBIG format through JBIG Transmission.
Important
❒ This function is not available with Internet Fax function.
To Next Page
Loading...
