Specifying a Destination
53
1
Using the Quick Dial Keys
You can specify a destination simply by pressing the Quick Dial key to which the
destination's number is registered.
When a Quick Dial key is pressed, the destination it is registered to appears on
the screen.
Pressing [] switches the destination list between fax number, e-mail ad-
dress, and IP-Fax destination.
Important
❒ In the destination list, program an individual fax number, IP-Fax destination,
e-mail address and/or groups of destinations.
Specifying a destination using the Quick Dial key
A Press [] to switch the destination between fax number, e-mail ad-
dress, and IP-Fax destination.
B Press the Quick Dial key in which the destination's number is programmed.
The destination's name is shown on the display.
If you make a mistake, press the {Clear/Stop} key and try again.
To select more destinations, repeat steps
A
and
B
.
C Press the {Start} key.
Note
❒ Destinations programmed can be checked using “Destination List” in “Ad-
ministrator Tools” in “System Settings”.
❒ You do not have to press [Add Dest] when adding a destination using the
Quick Dial keys.
ASO030S
To Next Page
Loading...
