Transmission
44
1
B Enter the fax number using the number keys.
C Press [Tone].
D Enter the number you want to tone dial using the number keys.
E Press the {Start} key.
The transmission starts.
If you want to cancel a transmission, press the {Clear/Stop} key, and then re-
move the originals.
After transmission, the standby display appears.
Note
❒ Certain services may be unavailable even when using the Tone function.
❒ A tone is shown as a “T” on the display and the next numbers are dialed
using tonal signals.
To Next Page
Loading...
