Send Settings
108
2
F Select the page opening orientation using {U} or {T}, and then press the
{OK} key.
The screen returns to that of step
C
.
G Press the {Escape} key.
The screen returns to the standby screen.
H Specify a destination, and then press the {Start} key.
Note
❒ When using this function, two-sided originals cannot be sent by using just
the exposure glass.
❒ The front and back of the scanned original will be printed in order on separate
sheets at the other end. The orientation of alternate sheets may be reversed at
the other end. If you want to print the original with the same orientation at
the other end, specify the original position and page opening orientation.
❒ This function is only available with Memory Transmission.
❒ You can program one of the User Function keys with operations for this
function. Using the User Function keys allows you to omit steps
B
and
C
.
❒ Make sure that the specified original position matches the orientation of
originals loaded in the ARDF.
Reference
p.33 “Placing Originals”
p.38 “Scan Settings”
“Fax Features”, General Settings Guide
ASO003S
To Next Page
Loading...
