Ricoh MP 161 - Page 30

Transmission
22
1
A Make sure that Memory Trans. indicator is not lit.
If Memory Trans. indicator is lit, press the {Transmission Mode} key to select
Immediate Transmission mode.
B Place the original.
C Select the scan settings you require.
D Using the number keys or a Quick Dial key, specify a destination.
To specify a destination using a Quick Dial key, see “Using the Quick Dial
Keys”.
If you make a mistake, press the {Clear/Stop} key, and then enter the correct
number.
E Press the {Start} key.
The machine dials a destination.
Note
❒ Documents are not stored in memory.
Reference
p.38 “Original Type”
p.39 “Resolution”
p.40 “Image Density (Contrast)”
p.42 “Sending Over a Fax Line”
p.45 “Sending by IP-Fax”
p.53 “Specifying a destination using the Quick Dial key”
p.54 “Specifying a group of destinations using the Quick Dial key”
p.57 “Redial”
ASO023S