Searching for a Destination in the Address Book
75
1
E Select [Advanced Search] using {U} or {T}, and then press the {OK} key.
F Select a search condition using {U} or {T}, and then press the {OK} key.
Conditions (Name, E-mail Address, Fax Destination, Company Name, and
Department Name) are those programmed in the LDAP server.
G Enter a partial string, and then press the {OK} key.
Depending on the type of characters you need to enter, press the
{
Shift
}
key to switch between modes.
To search for an IP-Fax destination, press [IP] on the Fax Destination screen.
H Select the search criteria using the scroll keys, and then press the {OK} key.
The meanings of the search criteria are as follows:
• [Include]: Search for strings that include the specified character.
Example: When searching for “ABC”, enter “A”, “B”, or “C”.
• [Exclude]: Search for strings that do not include the specified character.
Example: When searching for “ABC”, enter “D”.
• [First Word]: Search for strings that start with the specified character.
Example: When searching for “ABC”, enter “A”.
• [Last Word]: Search for strings that end with the specified character.
Example: When searching for “ABC”, enter “C”.
• [Exact Match]: Search for strings that fully match the specified character.
Example: When searching for “ABC”, enter “ABC”.
• [Fuzzy Search]: Perform a fuzzy search (according to the searching method
supported by the LDAP server).
To Next Page
Loading...
