Ricoh MP C4503 User Manual

19. Press [Connection Test] to check the path is set correctly.
20. Press [Exit].
If the connection test fails, check the settings, and then try again.
21. Press [OK].
22. Press [Exit].
23. Press the [User Tools/Counter] key.
Locating the SMB folder manually
1. Press [Change] under "Path".
2. Enter the path where the folder is located.
For example: if the name of the destination computer is "User", and the folder name is "Share", the
path will be \\User\Share.
If the network does not allow automatic obtaining of IP addresses, include the destination
computer's IP address in the path. For example: if the IP address of the destination computer is
"192.168.0.191", and the folder name is "Share", the path will be \\192.168.0.191\Share.
3. Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the
path again.
Locating the SMB folder using Browse Network
1. Press [Browse Network].
The client computers sharing the same network as the machine appear.
Network display only lists client computers you are authorized to access.
2. Select the group that contains the destination computer.
6. Scan
112

Ricoh MP C4503 Specifications

General

Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Type	Color Laser Multifunction Printer
Copy Speed	45 cpm
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Standard Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5
Scan Resolution	Up to 600 dpi
Fax Speed	33.6 kbps
Memory	1.5 GB