Ricoh MP C4503 User Manual

Problem Causes Solutions
Documents and reports do
not print out.
The paper output tray is full. Remove the prints from the tray.
Documents and reports do
not print out.
There is no paper left. Load paper. For details about loading
paper, see "Loading Paper", Paper
Specifications and Adding Paper .
An error has occurred. A function which has the
status "Error Occurred" in
the [Check Status] screen is
defective.
Press [Check] in the function which the
error has occurred. Then check the
displayed message, and take
appropriate action. For details about
error messages and their solutions, see
"When Messages Appear",
Troubleshooting .
You can use other functions normally.
The machine is unable to
connect to the network.
A network error has
occurred.
• Check that the machine is
correctly connected to the
network, and that the machine is
correctly set. For details about
how to connect the network, see
"Interface Settings", Connecting
the Machine/ System Settings .
• For details about connecting to
the network, contact your
administrator.
• If the indicator lamp is still lit even
after trying to solve the problem
as described here, contact your
service representative.
10. Troubleshooting
166

Ricoh MP C4503 Specifications

General

Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Type	Color Laser Multifunction Printer
Copy Speed	45 cpm
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Standard Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5
Scan Resolution	Up to 600 dpi
Fax Speed	33.6 kbps
Memory	1.5 GB