Ricoh P C300W - Page 155

5.System Maintenance
143
Menu
Description
Cnt Notice Mode
Sets the counter notification mode.
[0 to 5 / 0 / 1/step]
Per Notice Time
Displays the periodic notification date and time.
Cnt Notice Time
Displays the counter notification date and time.
Cnt End Time
Displays the counter closing date and time.
Next Per NotiTime
Displays the next periodic notification date and time.
Next Cnt NotiTime
Displays the next counter notification date and time.
Next Cnt End Time
Displays the next counter closing date and time.
Fix CntPol Time
Displays the center control polling date and time.
Test Flag
Sets the test flag.
[0 to 255 / 0 / 1/step]
Update Result
Displays the center information update results.
Mgn Expir Time
Specifies the margin to notify the proximity of the expiration
of the certification.
[2592000 to 15552000 / 2592000 / 1 sec/step]
NotiTime ExpTime
Displays the date and time to notify the proximity of the
expiration of the certification.
HTTP Proxy Use
Determines if the proxy server is used when the machine
communicates with the service center.
HTTP Proxy Host
Inputs the address of the proxy server used for
communication between the RCG Device and the gateway.
HTTP Proxy Port
Sets the HTTP proxy port number.
[0 to 65535 / 8080 / 1/step]
HTTP Prox AutUsr
Displays the HTTP proxy authentication user.
HTTP Prox AutPass
Displays the HTTP proxy authentication password.
Cer Updt Cond
Displays the certificate renewal status.
Cer Abnml Cause
Displays the certificate renewal error reason.
Cer Updt ReqID
Displays the certificate update request ID.
CERT:MacroVsn
Displays the Macro Version.
CERT:PAC Vsn
Displays the PAC Version.
Svr CNCheck
Sets the server authentication CN check.
[Disable/ Enable]
CERT:GW URL
Displays the NRS Gateway URL.
CERT:Use Pass
Displays the availability of PassPhrase.
CERT:Use MAC
Displays the availability of MAC.
CountNotify Int.
Display periodic notification timing (interval).