Ricoh P C300W - Page 316

4.Setting for PaaS (Only for CHN)
15
registration.
1. Launch the web browser.
2. In the web browser’s address bar, enter http://(machine’s IP address)/ to access the machine.
3. On the Web Image Monitor menu, select [PaaS (Printer as a Service) Settings].
4. Check that [Operation] is set to "Contract Registration".
Operation List:
Item
Description
Contract Registration
Select this to enter the ID and Authentication Key after registration.
Contract Status Checking
Select this if the machine stops operating.
The machine asks the server about the registration status.
Contract Cancellation
Select this to cancel the registration.
Device Replacement
Select this to replace the machine being used.
5. Check and enter [Contract ID], [Authentication Key], and [PaaS URL].