Ricoh P C300W - Page 50

4.Replacement and Adjustment
38
3. Press [Scanner Service Setting].
4. Press [Image Adjust].
5. Select the following settings and set them to the values on the barcode.
Setting
Initial
value
Range
(steps)
Description
Backside CIS-Red-
White
0
-30 to 30
(1)
Adjusts the difference in color balance between
the front and back for red.
Backside CIS-
Green-White
0
-30 to 30
(1)
Adjusts the difference in color balance between
the front and back for green.
Backside CIS-Blue-
0
-30 to 30
Adjusts the difference in color balance between