Ricoh Pro C5300S - Page 102

Removing staple waste
1. Check the message.
"Waste Staple Receptacle is full."
2. Press [Check Status] [Maintnc./Inquiry/Mach. Info].
3. Press [Guidance: Empty Waste Staple Receptacle] in "Waste Staple Receptacle Full".
4. Dispose of the paper debris from stapling according to the guidance in the animation.
Removing waste paper
1. Check the message.
"The Trimmer waste paper receptacle is full."
2. Press [Check Status] [Maintnc./Inquiry/Mach. Info].
3. Press [Guidance: Empty Waste Paper Receptacle] in "Waste Paper Recept. Full".
4. Dispose of the paper debris from paper cutting according to the guidance in the
animation.
6. Replacing Consumables / Waste Toner Bottle
100