Ricoh Pro C5300S - Loading Paper into the Bypass Tray

Loading Paper into the Bypass Tray
Use the bypass tray to use transparencies, adhesive labels, translucent paper, and paper that cannot be
loaded in the paper trays.
1. Open the bypass tray.
D0CPIC1279
Pull the extender out when loading paper whose size is larger than A4 or 8
1
/
2
× 11 .
2. Release the locks on both of the paper guides.
D0CPIC1349
3. Insert the paper print side up as far as it will go into the machine.
Do not stack paper over the limit mark.
Insert until the leading edge of the paper stops.
2. Loading Paper
20