Adjusting Stapling and Folding Positions
Finisher
To adjust the finisher function, press [07: Finishing: Finisher] in [Adjustment Settings for Operators].
• The settings that can be specified depend on the finisher in use.
• You can adjust the number of booklet folds in 0828: [Set Number of Folds for Booklet].
Select the setting to adjust and either enter the value using the numeric keys or adjust the setting by
pressing [ ] or [ ]. For example, when adjusting the booklet finisher's folding position in [Folding
Position for Booklet], if you cannot identify the direction for adjustment, you can adjust the value by
pressing [ ] or [ ] instead of entering the value using the numeric keys.
Fold
To adjust the function of the multi-folding unit, press [09: Finishing: Fold] in [Adjustment Settings for
Operators].
7. Troubleshooting
106
To Next Page
Loading...
