Aligning Front and Back Images in Duplex
Printing
If the front and back images are misaligned in duplex printing, you can align them with [Registration to
Align Front and Back Images].
Manual Adjustment
1. Press [Tray Paper Settings] on the Home screen.
2. Press [Registration to Align Front and Back Images].
3. Select the paper tray with the custom paper to align the front and back images.
4. Press [Manual Adjustment].
5. Adjust the image position and magnification on the front (Side 1) and back (Side 2).
For the alignment applied by adjusting the values, see the figure displayed on the screen for each
item.
6. After changing the values, press [OK].
7. Press [Test Print].
Test printing is performed to check the printed image.
8. Check if the images on the front and back are aligned on the printed sheet.
For further adjustment, repeat Steps 4 to 8.
9. After completing the alignment, press [Home] ( ) to close the [Tray Paper Settings]
screen.
Aligning Front and Back Images in Duplex Printing
111
To Next Page
Loading...
