11. Press [OK].
"Preventing Unwanted Faxes"
I want to stop the automatic printing of the journal.
Specify the appropriate fax settings.
1. Press [Settings] on the Home screen.
2. Press [Fax Settings] on the Settings screen.
3. Press [Frequently Used Settings] [Fax Records Auto Print].
4. Press [Off].
5. Press [OK].
I want to check the journal for the transmission and reception results.
Print all communication results in the specified period.
1. Press the [Fax (Classic)] on the Home screen.
2. Press [TX/RX Status / Print] on the fax screen.
3. Press [Print Records] [Specified Print Period].
4. Specify the period and press [Start].
"Viewing the History of Sent and Received Faxes"
I can't copy even though I press [Start] in the copier window.
If the message "After scanning last original, press [Finish Scan]." appears in the copier window, press
[Finish Scan].
Likewise, when copying with [Sort], [2 Sided / Combine], [1 Sided 2 Sided], [Batch] or [SADF],
confirm that scanning is complete.
I want to use Auto Tray Select to feed paper from a specific paper tray.
Specify the following settings:
• Manual setting
1. Press [Tray Paper Settings] on the Home screen.
2. Select the paper tray.
7. Troubleshooting
120
To Next Page
Loading...
