101
Figure 7.5-15: Color Adjusted Up
Figure 7.5-17: Pure White Adjustment
Pure White is set at 100 by default to print the whitest ink in the pure white areas of your image. If desired
this can be lowered here. (Figure 7.5-17)
Remember you can still further adjust your image by changing the settings on the Color Adjustments Tab.
Also located on that tab is the Transparency window that will let you remove a color range from your image
to create a transparency. This feature is limited so you may achieve better results using your image editing
software.
Figure 7.5-18: Enable White Highlight
To Next Page
Loading...
