Ricoh Ri 3000 - Page 105

102
Figure 7.5-19 White Highlight Enabled
Figure 7.5-20 Highlight Layer View
 White Highlight allows for a second layer of pure white to be printer during the color layer,
allowing for a brighter white. If using white highlight, make sure there is dead pixel space
between any large amounts of pure white and any CMYK color as it may cause white ink to mix
the color at the edge.
 To remove all of a specific color range, select Select Color. (Figure 7.5-21) Then click the color
you want to remove from your image. The selected color will be removed from the entire image.
You can increase the range of the color removed by adjusting the Color Tolerance slider. (Figure
7.5-22)
Figure 7.5-21: Select Color to be Removed