• If an error occurs before overwriting is completed, turn off the main power. Turn it on, and then
repeat from Step 1.
Press the [Menu] key, and then select setting items using the [ ] or [ ] key.
1. Log in as the machine administrator from the printer's control panel.
2. Select [Security Options] Press [OK]
3. Select [Auto Erase Memory Setting] Press [OK]
4. Select [On] Select [HDDErase]
5. Select the method of erasing the data from [NSA], [DoD], or [Random Numbers]. Press
[OK]
If you select [Random Numbers], enter the number of times that you want to overwrite. Press [OK]
6. Press [OK].
7. Press [Menu] twice.
8. Log out.
1. Log in as the machine administrator from the control panel.
2. Display the "Auto Erase Memory Setting" screen.
[System Settings] [Administrator Tools] [Auto Erase Memory Setting]
3. Select the method of overwriting.
NSA
[On] [NSA] [OK]
DoD
[On] [DoD] [OK]
Random Numbers
[On] [Random Numbers] [Number of Erase] Enter the number of times that you
want to overwrite using the number keys [OK] [OK]
4. Log out.
• If you enable both overwriting and data encryption, the overwriting data will also be encrypted.
4. Preventing Leakage of Information from Printer
96
To Next Page
Loading...
Need help?
General
Weight and Dimensions
