Protocol Port Setting method When disabled
HTTPS TCP:443
• Web Image Monitor
•
telnet
• SmartDeviceMonitor for
Admin
• Device Manager NX Lite
Functions that require HTTPS
cannot be used.
@Remote cannot be used.
You can also make settings to
require SSL transmission using
the control panel or Web
Image Monitor.
SMB TCP:139
• Control panel
•
Web Image Monitor
• telnet
• SmartDeviceMonitor for
Admin
• Device Manager NX Lite
• Remote Communication
Gate S
SMB printing functions cannot
be used.
NBT
UDP:137
UDP:138
• telnet
SMB printing functions via
TCP/IP, as well as NetBIOS
designated functions on the
WINS server cannot be used.
SNMPv1,v2 UDP:161
• Web Image Monitor
•
telnet
• SmartDeviceMonitor for
Admin
• Device Manager NX Lite
• Remote Communication
Gate S
Functions that require SNMPv1,
v2 cannot be used.
Using the control panel, Web
Image Monitor or telnet, you
can specify that SNMPv1, v2
settings are read-only, and
cannot be edited.
SNMPv3 UDP:161
• Web Image Monitor
•
telnet
• SmartDeviceMonitor for
Admin
• Device Manager NX Lite
• Remote Communication
Gate S
Functions that require SNMPv3
cannot be used.
You can also make settings to
require SNMPv3 encrypted
transmission and restrict the use
of other transmission methods
using the control panel, Web
Image Monitor, or telnet.
5. Enhanced Network Security
106