Ricoh SP 4510dn User Manual

If you select [Level 2], specify the password using a combination of three types of characters
selected from upper-case letters, lower-case letters, decimal numbers, and symbols such as #.
Default: [Off], Minimum required number of characters not specified
@Remote Service
This can be specified by the machine administrator.
Communication via HTTPS for @Remote Service is disabled if you select [Prohibit].
When setting it to [Prohibit], consult with your service representative.
If it is set to [Proh. Some Services], it becomes impossible to change settings via a remote
connection, providing optimally secure operation.
Default: [Do not Prohibit]
Update Firmware
This can be specified by the machine administrator.
Specify whether to allow firmware updates on the printer. Firmware update means having the
service representative update the firmware or updating the firmware via the network.
If you select [Prohibit], firmware on the printer cannot be updated.
If you select [Do not Prohibit], there are no restrictions on firmware updates.
Default: [Do not Prohibit]
Change Firmware Structure
This can be specified by the machine administrator.
Specify whether to prevent changes in the printer's firmware structure. The Change Firmware
Structure function detects when the SD card is inserted, removed or replaced.
If you select [Prohibit], the printer stops during startup when a firmware structure change is detected
and a message requesting administrator login is displayed. After the machine administrator logs in,
the printer finishes startup with the updated firmware.
The administrator can confirm if the updated structure change is permissible or not by checking the
firmware version displayed on the control panel screen. If the firmware structure change is not
permissible, contact your service representative before logging in.
When "Change Firmware Structure" is set to [Prohibit], administrator authentication must be
enabled.
After [Prohibit] is specified, disable administrator authentication. When administrator authentication
is enabled again, you can return the setting to [Do not Prohibit].
If you select [Do not Prohibit], firmware structure change detection is disabled.
Default: [Do not Prohibit]
Password Entry Violation
This can be specified by the machine administrator.
7. Managing the Printer
222

Ricoh SP 4510dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printing colors	Black
Maximum duty cycle	150000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Total input capacity	600 sheets
Maximum input capacity	1600 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Letterhead
Maximum ISO A-series paper size	A4
Wi-Fi	-
Supported network protocols (IPv4)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Storage media	HDD
Internal memory	512 MB
Maximum internal memory	1536 MB
Internal storage capacity	320 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1110 W
Power consumption (printing)	- W
Power consumption (PowerSave)	1 W
Product color	Grey, White
Cables included	AC

Weight and Dimensions

Depth	392 mm
Width	370 mm
Height	306 mm
Weight	14000 g