Ricoh SP 4510dn User Manual

• Make sure the login user name and password are entered correctly.
•
Make sure a usable login name is registered on the printer. Authentication will fail in the following
cases: If the login user name contains a space, colon (:), or quotation mark ("). If the login user
name exceeds 128 bytes.
L0406-202 / L0406-203 : Case 3
There is an error in the simple encryption method.
•
Authentication will fail if the password is left blank in simple authentication mode. To allow blank
passwords, contact your service representative.
• In simple authentication mode, the DN of the login user name is obtained in the user account.
Authentication fails if the DN cannot be obtained. Make sure there are no errors in the server
name, login user name/password, or information entered for the search filter.
L0406-204
Kerberos authentication failed.
•
Kerberos authentication settings are not correctly configured. Make sure the realm name, KDC
(Key Distribution Center) name, and supporting domain name are specified correctly.
• The KDC and printer timing do not match. Authentication will fail if the difference between the KDC
and printer timing is more than 5 minutes. Make sure the timing matches.
• Kerberos authentication will fail if the realm name is specified in lower-case letters. Make sure the
realm name is registered using uppercase letters.
L0409-000
Authentication timed out because the server did not respond.
•
Contact the server or network administrator. If the situation does not return to normal, contact your
service representative.
L0511-000
The authentication server login name is the same as a user name already registered on the printer.
(Names are distinguished by the unique attribute specified in the LDAP authentication settings.)
•
Delete the old, duplicated name or change the login name.
• If the authentication server has just been changed, delete the old name on the server.
L0606-004
Authentication failed because the user name contains language that cannot be used by general users.
•
Do not use "other", "admin", "supervisor" or "HIDE*" in general user accounts.
L0607-001
An authentication error occurred because the Address Book is being used at another location.
•
Wait a few minutes and then try again.
If an Error Code is Displayed
239

Ricoh SP 4510dn Specifications

General

Color	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Printing colors	Black
Maximum duty cycle	150000 pages per month
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Total input capacity	600 sheets
Maximum input capacity	1600 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper, Thick paper, Thin paper
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Letterhead
Maximum ISO A-series paper size	A4
Wi-Fi	-
Supported network protocols (IPv4)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Storage media	HDD
Internal memory	512 MB
Maximum internal memory	1536 MB
Internal storage capacity	320 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1110 W
Power consumption (printing)	- W
Power consumption (PowerSave)	1 W
Product color	Grey, White
Cables included	AC

Weight and Dimensions

Depth	392 mm
Width	370 mm
Height	306 mm
Weight	14000 g