2. A completed screen looks like this:
3. The following parameters are recommended:
•
PSF configuration (PSFCFG)
The name used for this PSF configuration object. The name must match the user-defined object
name (USRDFNOBJ) in the printer DEVD.
• IPDS pass through (IPDSPASTHR)
To print SCS and IPDS files (which do not use AFP functions) with minimal processing, specify
*YES. PSF/400 transforms SCS into IPDS before printing.
• Activate release timer (ACTRLSTMR)
Specifies the point at which the release timer (RLSTMR) is activated. Set to *NORDYF.
• Release timer (RLSTMR)
Specifies the amount of time to wait before a session or dialog is released, without terminating
the writer. The ACTRLSTMR parameter specifies when this timer is to be activated. Verify that
the IPDS TIMEOUT value on the printer is "0" or "OFF". Set the System i parameter to
*SEC15.
This releases the printer to service other jobs from other ports, 15 seconds after the last IPDS
job has printed.
Configuring PSF/400 for IPDS
23