tray and default tray, even if you specify "envelope" as the paper type, the tray value will not be
changed.
Offset Range Meaning
0-1 LENGTH of this Self-Defining Field
X'0018' or Machine with NO Media OID
X'0024' or Machine with Single Media OID
X'0025' or Machine with Double Media OID
X'0026' or Machine with Triple Media OID
X'0027' or Machine with Quadruple Media OID
X'nnnn' Machine with Media Name
2-3 X'0001' PRINTABLE AREA Self-Defining Field ID
4 INPUT MEDIA SOURCE
X'00' Tray 1
Tray 2
*1
X'00' Tray 1 (Paper type: Envelope) + Tray 2 + Bypass Tray
Tray 1 (Paper type: Envelope) + Tray 2 + Tray 3 + Bypass tray
X'01' Tray 1 + Tray 2 + Bypass tray
Tray 1 + Tray 2 + Tray 3 + Bypass tray
Tray 3
*1
X'01' Tray 1 (Paper type: Envelope) + Tray 2 + Tray 3 + Bypass tray
X'02' Tray 1 + Tray 2 + Tray 3 + Bypass tray
X'63' Bypass tray
X'FF' Default tray
X'00' Reserved
6 X'00' UNIT BASE 10 in.
7 X'00' Reserved
1. Device Control Command Set
70
To Next Page
Loading...
