Offset Range Meaning
37-38 X'0004' -
X'0013'
Input Media ID LENGTH (Note 4)
Byte 39 Input Media ID TYPE
X'00' User Defined Name
40-end Input Media ID (Form Name)
X'4C6574
746572'(i
e. Letter)
(1 to 16 Byte Form Name)
*1
Available values vary depending on the installed option.
•
In the OPC Acknowledge Reply, the Printable Area SDF repeats for every installed Media Source.
Therefore, since printers are capable of supporting multiple installed input trays, multiple Printable
Area SDF's may be returned in a single XOH-OPC Acknowledge Reply.
• The Input Media Source Characteristics (Bit 0), of the Printable Area SDF indicates the duplex
ability of a given media source. See "Media Source and Destination Support Matrices", for specific
details on media duplex ability.
• Input Media ID type X'06' - Media OID is only returned if a particular media has a registered
MO:DCA Media Type OID.
• Input Media ID type X'00' - User Defined Name is only returned if the user defines a Form, assigns
a Form Name to the Form and associates that Form with a given Input Media Source tray.
Image and Coded Font Resolution Self-Defining Field
Offset Range Meaning
0-1 X'000A' LENGTH of this Self-Defining Field
2-3 X'0003' IMAGE and CODED FONT RESOLUTION Self-Defining Field
4 X'00' UNIT BASE 10 inches
5 FONT RESOLUTIONS
X'00' Resolution Acceptance Mode (Only value in bytes 6-9)
X'FF' Resolution Independence Mode (Bytes 6-9 specify highest resolution) (240
DPI or 300 DPI or 600 DPI)
Execute Order Home State (XOH)
83
To Next Page
Loading...
