Rigol DM3000 Series - Chapter 4: Prompt Messages& Troubleshooting; Prompting Message

RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 4-1
User Manual for DM3000 Series
Chapter 4 : Prompt messages& troubleshooting
Prompting Message
1． Delay time is 0 to 3600s
In trigger setting, the setting value scope of auto trigger delay time is 0~3600s.
2． No useful Math
Currently measurement function is not available for Math function.
3． Continue is 1Ω to 2000Ω
In continuity measurement, the short-current resistance setting value scope is
1Ω~2000Ω.
4． Sample is 1 to 65535
Single trigger sampling number scope is 1~65535.
5． Achieves the Maximum number
In arbitrary sensor setting, the reference value number gets the max value.
6． Number of reference value is **
The arbitrary sensor reference value number is: **.
7． Resistance is 0 to 120MΩ
In limit test and null value settings the resistance value scope: -120 MΩ~120MΩ。
8． Value must larger than 1us
In limit test and null value settings the periods setting value should be bigger
than 1us.
9． Value is unable
Null value function setting value cannot surpass the measuring range scope.
10. Upper limit should larger than lower limit
In limit measurement the Upper limit should larger than lower limit.
All manuals and user guides at all-guides.com