Rigol DM3000 Series - Store and Recall

RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 2-27
User Manual for DM3000 Series
Store and Recall
To use the Storage and Recall function, you can save, load, and delete the
measurement data, parameters and sensor documents in the local storage. And also
you can do the same operation in a USB storage.
Press key, and enter the menu shown below:
Figure 2-25
Table 2-19 Storage and Recall Function Menu Explanation
Function
Menu
Setting Explanation
Disk
C:/( Local)
A:/( U-Disk)
Choose Local or U-Disk storage.
Type
Data/
Parameters/
Sensor
…
Choose the type of the files shown.
Read Load the documents you have selected.
Save
Save the document to the location which you have
selected.
Erase Delete the document which you have selected.
Save all changes, back to a higher level menu.
All manuals and user guides at all-guides.com