Rigol DM3000 Series User Manual

RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 2-43
User Manual for DM3000 Series
Set Up LAN I/O Parameter
LAN Parameters You may choose to manually set the following parameters, as
described in the subsections that follow. Following these descriptions are procedures
for setting up a LAN configuration from the front panel and the remote interface.
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
• Host Name
Press Æ I/O Æ LAN , enter the menu shown below:
Figure 2-50
Table 2-30 LAN Parameter Function Menu Explanation
Function
Menu
Setting Explanation
IP
Set IP address and others
information.
DNS
Host Name/
Domain Name/
DNS address
Set the host name.
Set the domain name.
Set DNS address.
Info
Examines the current LAN
connection information.
Save all changes, back to a higher
level menu.

Rigol DM3000 Series Specifications

General

Brand	Rigol
Model	DM3000 Series
Category	Multimeter
Language	English