Rigol DP800 Series User Manual

Chapter 2 Front Panel Operations RIGOL
DP800 User’s Guide 2-41
Utility
Press Utility at the front panel to enter the interface as shown in the figure below.
This interface displays the current system parameters.
Figure 2-12 Utility Interface
1. I/O Configuration: set the LAN (option), RS232 (option) and GPIB (option,
extended using the USB to GPIB interface converter) interface parameters.
2. System Setting: set the system parameters, such as the beeper and screen
saver.
3. System Information: view system information, such as the device model and
serial number.
4. Language: set the system language.
5. Test/Calibration: view the test information and calibrate the instrument
manually.
6. Print: print the screen content into the USB storage device.
7. Preset: users can define the setting recalled by Preset at the front panel.
8. Option: install the option or view the current option installation information of
the instrument.

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English