Chapter 2 Front Panel Operation RIGOL
User’s Guide for DSA800/E Series
DMA (Only for DSA832/DSA875/DSA832E)
Press DMA to enter DMA mode. You can connect the instrument to the PC installed
with S1220 ASK-FSK Demodulation Analysis and register the software to make
demodulation and analysis for the ASK/2FSK signal. For details, refer to
S1220
ASK-FSK Demodulation Analysis_Help Document_EN
.
You can press Exit to switch to the sweep mode when the spectrum analyzer is in
DMA mode.
To Next Page
Loading...
