Rigol DSA815 User Manual

Chapter 4 Troubleshooting&Message RIGOL
User’s Guide for DSA800/E Series
4-11
-130 Suffix error.
This error, as well as errors -131 to -139, is generated when parsing a
suffix. This error message is always used when the device cannot
detect a more specific error.
-131 Invalid suffix.
The suffix does not follow the syntax described in IEEE 488.2, 7.7.3.2,
or the suffix is inappropriate for this device.
-134 Suffix too long.
The suffix contained more than 12 characters (see IEEE 488.2,
7.7.3.4).
-138 Suffix not allowed.
A suffix was encountered after a numeric element which does not
allow suffixes.
-140
Character data error.
This error, as well as errors -141 to -149, is generated when parsing a
character data element. This error message should be used if the
device cannot detect a more specific error.
-141 Invalid character data.
The command header is invalid when the character data element
contains an invalid character or a particular character.
-144 Character data too long.
The character data element contains more than twelve characters (see
IEEE 488.2, 7.7.1.4).
-148
Character data not allowed.
A legal character data element was used in a position prohibited by the
device.
-150 String data error.
This error, as well as errors -151 to -159, is generated when parsing a
string data element. This error message is always used when the
device cannot detect a more specific error.
-151 Invalid string data.
A string data element was expected, but was invalid for some reason
(see IEEE 488.2, 7.7.5.2); for example, an END message was received
before the terminal quote character.
-158 String data not allowed.
A legal string data element was encountered but was not allowed by
the device at this point in parsing.

Rigol DSA815 Specifications

General

Brand	Rigol
Model	DSA815
Category	Measuring Instruments
Language	English