92
Store Operations
During store, the Pause/Cont key can be used to pause and resume the
store. During pause, the pause symbol ( ) is shown.
14. During normal Auto 1 store, the data store process terminates when the
measurement time has elapsed.
To stop the process before that, press the Start/Stop key or the Store key.
During Timer Auto 1 store, the data store process terminates when the
measurement time has elapsed, or when the preset stop time is reached.
Note
Elapsed measurement time and data number
If a 100 ms interval is selected for Auto 1 store, 10
data will be stored each second. This means that 100
data will be stored after 10 seconds. When a 1-sec-
ond interval is selected, 10 data will be stored after
10 seconds.
Note
During Auto 1 store, the data exclusion (back-erase)
function cannot be used.
Important
During store, most of the keys such as the A/C/
FLAT key and Fast/Slow key are inoperative.
Only the following three keys can be used:
Start/Stop, Pause/Cont, Light. All other settings
must be made before starting the store.
To Next Page
Loading...
