122
Optional Accessories
Printing out data stored with Auto 2 mode in the optional memory
card
The following explanation assumes that data have been stored in the optional
memory card. For an explanation of the store process, see the section "Store
Operations".
To print out the data, proceed as follows.
1. Verify that the memory card is inserted in the card slot.
2. Press the Recall key to bring up the card recall screen.
The data are sorted by measurement start time, in descending order.
< S t o r e >
2 5
S t o r e m o d e : A u t o 2
L e q
F i l e n a m e : A U 2 _ 1 2 3 4
S t o r e m o d e
M e n u s c r e e n 2 / 5
O K R e c a l l C l o s e P a u s e
M A N _ 0 0 0 1 0 1 2 0
A U 1 _ 1 1 0 0
A U 1 _ 0 0 0 2
M e m o r y l e f t
3 2 4 4 k
1
A U 2 _ 0 0 0 1
0 1
2 0
0 1
2 2
0 1
2 3
1 3 : 1 0
1 2 : 1 5
1 5 : 0 0
0 8 : 3 0
C a r d r e c a l l s c r e e n
3. Use the Page Up/Down keys to go to the page with the desired file name.
4. Use the and keys to highlight the desired file name.
5. Press the Recall key.
The data of the selected file are shown on the display.
To Next Page
Loading...
