84
Store Operations
11. Press the Store key.
The sound level at point when the key was pressed is stored.
If processing measurement was carried out in step 9, the processed
data are also stored in the same way.
The store process is completed in about one second, and the data number
is incremented by 1. Pressing the Store key repeatedly allows you to
consecutively store data.
The stored data comprise all information shown on the display (except
for the battery indication), as well as the current date and time, start
date and time of processing, measurement time, frequency weighting,
time weighting (dynamic characteristics), and processing results.
The time/level graph shown on the display is not stored.
Important
The unit does not check whether data to be
stored are present. When the Store key is
pressed, the data in the currently selected data
number are overwritten, even if no new data are
available.
Note
When the data number 100 is reached, the indication
does not change further and does not return to 1. When
the Store key is pressed in this condition, the "100"
indication flashes, but data are not stored. Pressing
the and (Data No.) keys to select another num-
ber causes the indication to stop flashing, and data
can be stored in the selected data number.
To Next Page
Loading...
