Agility 3 User Manual
Page 43
Internal GSM/GPRS BUS module fault
GSM network is not available
GSM Network quality is acceptable
The GSM RSSI level is low
PIN code entered is incorrect
PUK Code entered is correct
SIM card missing or not properly sited
High temperature alert restored from zone XX defined as a
temperature detector
High temperature alert from zone XX defined as a temperature
detector
Hold-Up Reinstatement in partition y
AC power restore on I/O module
AC power fault on I/O module
I/O module battery fault restored
I/O module battery fault alert
I/O module jamming alert restored
I/O module is regarded as lost following supervision test
I/O module tamper alert restored
The Agility received a signal from I/O module after it has been
regarded as lost
Failed to acquire an IP address from the DHCP server
Succeeded to acquire an IP address from the DHCP server
Failed to connect to IP network
Successful connection to IP network
Failed to acquire time data from the time server
Succeeded to acquire time data from the time server
Wireless receiver jamming restore
Zone XX defined as KeyBox type is open
Zone XX defined as KeyBox type is closed
Low battery fault restored from keypad Y
Low battery fault from keypad Y
To Next Page
Loading...
