Risco Agility 3 - Home Automation;Outputs

Agility 3 User Manual
Page 57
Colored Image
YES(1)
YES/NO
Specifies whether the captured and transmitted photographic image is to be color or
black and white.
Flash
YES(1)
YES/NO
Specifies if an image capture is to be enhanced with a light flash.
Total Snapshots
2(2)
(1-9)
Specifies the number of snapshots to be taken in response to a triggering event .
Use Difference Snapshots
YES(1)
YES/NO
When multiple snapshot images are transmitted, selecting this option results in a
transmission file size which has been minimized as a result of being subject to a jpeg
image lossy compression algorithm.
Time between snapshots
.5 seconds(1)
0.1–2 seconds
Specifies the elapsed time between snapshots.
(1) Configurable by Engineer only
(2) Configurable by Engineer and User
Discuss this capability with your security service provider to determine if it is applicable to
your system.
Home Automation/Outputs
The Web Application allows you to control and schedule up to 16 automated lights and
appliances in your home. The application offers a comprehensive interface that enables
you to view the settings for all of your automated devices at once and activate them. The
Automation/Output page displays a table of your outputs and each output's scheduled
settings.
Discuss this capability with your security service provider to determine if it is applicable to
your system.