18 • Control Buttons
that has been downloaded.
Select one of the following display options by clicking on the
appropriate selection button: Need Calibration, Calibration Date,
or Calibration Record.
• Need Calibration — selecting this option shows calibration
information only for the GX-2003 units due for calibration.
NOTE: The calibration interval value, the number of days after a
calibration that a new calibration is due, is saved in the
GX-2003. If the calibration interval is changed in the
GX-2003, the new calibration interval value will not be
known by the software until the GX-2003 is downloaded
using the Complete Download button or the
Instrument Information button.
• Calibration Date — selecting this option shows the
calibration information for all the GX-2003 units that are in the
software database. The fields for the Need Calibration and
Calibration Date screens are the same. Figure 9 shows the
Figure 9: Last Calibration Information: Need Calibration Option
To Next Page
