32 • Viewing, Printing, Exporting, and Deleting Data
After specifying the, file name, file location, and file type click
the Save button to save the file to the specified location.
10.To save the table to the clipboard, click the To clipboard
button and the table will be saved to the clipboard. It can
then be pasted into a document by using the Paste
command in an application.
11.To go back and view other data, click the Data button on the
right side of the program window and select the data you
want to view.
Interval Trend Data
Average gas concentrations over the user defined interval time
are logged in the interval trend data files. The interval time is set
using the GX-2003 Setup Mode. See the GX-2003 Operator’s
Manual for instructions to set the data logging interval time.
Events, such as gas alarms or low flow alarms, are saved in the
data file when they occur.
An interval trend file is created and saved in the GX-2003 when
the instrument is turned off. The serial number, user ID, and
station ID that are entered in the instrument when it is turned on
are saved for the interval trend file.
Figure 21: Save as Dialog Box
To Next Page
Loading...
