Viewing, Printing, Exporting, and Deleting Data • 29
The lower left frame contains three selection boxes for
organizing data. If none of the boxes are selected, then the data
is organized as shown in Figure 18. The data may be organized
by one or more of the following parameters: serial number,
station ID, or user ID. Click the selection box or boxes in the
lower left frame to organize the data as desired.
NOTE: In the examples that follow, the data will be shown
organized by serial number. If you do not select any of
the organization boxes or select the Station ID or User
ID boxes instead of or in addition to the Serial No. box,
your Data window will look slightly different.
The upper right frame shows the contents of a data folder that is
selected in the Data frame. The lower right frame shows the
summary information for a data file that is selected in the upper
right frame.
The View Data control button is located at the bottom of the
lower right frame. The View Data button becomes active when a
data file is selected in the upper right frame. Clicking the View
Data button opens the data file and displays the data.
Calibration History
Instrument calibration history is available in two separate
locations in the program. The information regarding the most
recent successful calibration for each channel of an instrument
along with whether or not an instrument is due for calibration
can be accessed using the Last Calibration button on the right
side of the program window. See “Last Calibration Button” on
page 17 for a complete description of the information that can be
accessed by the Last Calibration button.
All downloaded calibration information for all downloaded
instruments is available in the Calibration History folders in the
Data window. This information is saved in a Calibration History
folder that is located in an untitled folder for each instrument.
The calibration history files are differentiated by instrument. The
calibration information available here is more comprehensive
than that in the Last Calibration window. The calibration
information for all calibrations downloaded, whether successful
or not, is saved instead of just the most recent successful
To Next Page
Loading...
Need help?
General
