22 • Control Buttons
Set Button
Clicking the Set button opens the Set window.
In the Set window, you can perform the following functions:
• Alter the appearance of the software windows with the Font
and Color buttons
• Change parameters of a connected instrument by editing the
fields in the GX-2003 Status frame and in the Gas/Sensor
frame at the bottom of the window and clicking the Update
button
• Update the date and time in a connected instrument by using
the Date/Time Set button
• Calibrate a connected instrument by using the Calibration
button
• Reset the defaults in a connected instrument by using the
Default Set button
Figure 11: Set Window
To Next Page
Loading...
