Viewing, Printing, Exporting, and Deleting Data • 31
file or files for that instrument will appear in the top right
frame. If multiple Station ID’s or User ID’s are used for an
instrument, then more than one Calibration Histories file will
appear.
6. Click the file to select it. The first two calibrations saved will
be shown in the bottom right frame along with the total
number of calibrations saved if it is more than two.
7. To view the Calibration Histories file in table format, double
click the Calibration Histories file or click the View Data
button. Calibration Histories files can only be viewed in table
format.
8. If you want to print the data, click the Print button. A Print
dialog box will appear for you to select a printer.
9. To export the data to another application, for example a
spreadsheet or database, click the Export button. A “Save
As” dialog box will appear for you to specify the filename, file
location. The default file type is “.csv” (comma-separated
values.
Figure 20: Data View - Calibration History
To Next Page
Loading...
Need help?
General
